MEMBRANE SWITCHES

Product Designation
Description
Typical Application/Benefit
Application Method
Electrical Resistance
Ohms/Sq/Mil
Silver Circuit Traces
CI-1001
Silver-vinyl ink, highly conductive, flexible
Circuit traces / Low Ω, low cost
Screen Print
< 0.015
CI-1028
Silver-polyester ink, high solids, wear resistant, fast dry
Circuit traces / fine line printable, long switch actuation life
Screen Print
< 0.020
CI-1036
Silver-urethane ink, highly conductive, highly flexible
Circuit traces / lowest Ω, highly creasable
Screen Print
< 0.010
Carbon Resistors, Contact Pads
CI-2001
Carbon-vinyl ink, general purpose
Top coat for silver contacts, can blend with CI-1001 to target resistance
Screen Print
< 20
CI-2002 Series
Carbon inks, stable resistance
Varied resistance blends for target resistance matching
Screen Print
20 – 100,000
CI-2042
Carbon ink, low ohm
Low cost x-over, low ohm resistor
Screen Print
< 10
CI-5001
Nickel ink, highly wear resistant for ZIF connectors, low ohm
ZIF tail contacts and jumpers, print in one pass
Screen Print
< 5
Dielectric Insulators
DI-7502
Dielectric, UV cure
Silver trace and cross-over junction insulation, highly flexible
Screen Print
>1,000 Mega ohms
DI-7509
Dielectric, UV Cure
Silver trace and cross-over junction insulation, moisture resistant
Screen Print
>1,000 Mega ohms
DI-7009
Heat cure insulator
Silver trace insulation, highly flexible
Screen Print
>100 Mega ohms
Miscellaneous
DB-1501
Silver epoxy, single component
SMD attachments, high shear strength, long stencil life
Stencil Print
0.0004 ohm-cm
DB-1561
Silver epoxy, two component
SMD attachment, low temp cure
Needle Dispense
0.003 ohm-cm
DI-7801
UV pressure sensitive adhesive
Selectively print PSA, eliminate die-cut tapes
Screen Print
>1,000 Mega ohms
DI-7511
UV spacer
Thick printing for spacer formation, good insulation for silver traces
Screen Print
>1,000 Mega ohms
CI-1035
Silver-polyester, adhesion and stress compatible with ITO coated film.
Capacitive or transparent touch switch, low temp cure
Screen Print
< 0.025