HEATERS
Product Designation |
Description |
Typical Application/Benefit |
Application Method |
Electrical Resistance Ohms/Sq/Mil |
|
| Silver Buss Bars | |||||
CI-1001 |
Silver-vinyl ink, highly conductive, flexible |
Circuit traces / Low Ω, low cost |
Screen Print |
< 0.015 |
|
CI-1028 |
Silver-polyester ink, high solids, wear resistant, fast dry |
Circuit traces / fine line printable, long switch actuation life |
Screen Print |
< 0.020 |
|
| Carbon Resistors | |||||
CI-2002 Series |
Carbon inks, stable resistance |
Varied resistance blends for target resistance matching |
Screen Print |
20 – 100,000 |
|
CI-2026 Series |
Carbon inks, stable resistance, high temperature compatible thermoset |
Severe environment compatible |
Screen Print |
20 – 1000 |
|
CI-2042 |
Low ohm stable resistance carbon heating element |
Low resistance heating element |
Screen Print |
< 10 |
|
| Dielectric Insulators | |||||
DI-7503 |
Dielectric, UV cure |
Buss bar insulation, highly flexible |
Screen Print |
>1,000 Mega ohms |
|
| Positive Temperature Coefficient Resistor | |||||
CI-5012 |
Proprietary PTCR ink, 40°C shut-off temperature |
Self regulating heaters, current control, sensors |
Screen Print |
> 50 up to 40°C, >1.5k over 40°C |
|
CI-5012 |
Proprietary PTCR ink, 65°C shut-off temperature |
Self regulating heaters, current control, sensors |
Screen Print |
> 30 up to 65°C, >3.0k over 65°C |
|
| Miscellaneous | |||||
DB-1501 |
Silver epoxy, single component |
SMD attachments, high shear strength, long stencil life |
Stencil Print |
0.0004 ohm-cm |
|
DB-1561 |
Silver epoxy, two component |
SMD attachment, low temp cure |
Needle Dispense |
0.003 ohm-cm |
|
DI-7801 |
UV pressure sensitive adhesive |
Selectively print PSA, eliminate die-cut tapes |
Screen Print |
>1000 Mega ohms |
|